2B repeat, Resume, View, Return | Philips AZ2536/01 guide

A-2B repeat

This feature is also applicable to audio CD (except for MP3-CD). To Play a certain scene or passage of the disc repeatedly,

1.Press A-2Bon the remote control during playback to mark the start point of the chosen scene or passage.

™"REPEAT A" will appear on the screen.

2.Press A-2Bagain to mark the end of the chosen scene or passage.

™"REPEAT AB" will appear on the screen.

™The selected scene or passage will start playing repeatedly.

3.Press A-2Bonce more to return to normal playback.

™"REPEAT AB" will disappear from the display.

Helpful hints:

- You can also cancel A-2B repeat by pressing ¡ or ™.

- The A-2B repeat marking can only be set within the same track.

•In stop mode, press RESUME on the remote control to start playback again from where you have stopped.

Helpful hints:

-Resume will not be available if you have changed the disc, opened the disc tray or disconnected the system from the power supply.

This feature allows you to scan through a VCD for a quick review. PBC mode must be switched off.

1.In stop mode, press VIEW on the remote control to go to disc view function.

™On TV screen, up to 9 pictures will be displayed. If a menu consists of more than one page, press ¡ or ™ to view the previous/next page.

™The first several seconds of each track will be played.

To exit review mode, press digits 0 - 9 to play the desired track or 2; to play the current selected track.

2.In playback mode, press VIEW on the remote control to go to track view function.

™press ¡ or ™ to select the track.

™On TV screen, up to 9 pictures within the track will be displayed.

™The first several seconds of each picture will be played.

To exit review mode, press digits 0 - 9 to play the desired position within the track or 2; to play the current selected position.

Helpful hints:

-If the disc is AVCD disc and there're no video tracks on the same viewed page, cannot use the direct digital key to play the track.

•Press RETURN on the remote control to return to the previous VCD disc MENU level. It is functional only for Video CD when PBC is switched on.