Philips AZ2536/01 user manual Cassette Playback, Cassette Recording, Cassette playback

CASSETTE RECORDER

CASSETTE PLAYBACK

Cassette playback

1 Select TAPE source.

™ Display: shows throughout tape operation.

2 Press STOP • OPEN 9 / to open the cassette door.

3 Insert a recorded cassette and close the cassette door. 4 Press PLAY 1 to start playback.

5To interrupt playback press PAUSE ;. To resume, press this key again.

6By pressing SEARCH 5 or 6 on the set fast winding of the tape is possible in both directions.

7To stop the tape, press STOP • OPEN 9 /.

• The keys are automatically released at the end of a tape, except if PAUSE ; has been activated.

CASSETTE RECORDING

General information on cassette recording

•Recording is permissible insofar as copyright or other rights of third parties are not infringed.

•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken.

•Check and tighten slack tape before use with a pencil, to avoid jamming the deck machanism.

•The recording level is set automatically. Altering the VOLUME MAX SOUND or BASS, MID & HIGH controls will not affect the recording in progress.

Helpful hints:

-No recording will take place during the 7 seconds in the beginning of the tape.

• To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in front of you and break out the left tab. Recording on this side is no longer possible.

1

English

21