SUB-TS15 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS
¡Subwoofer-Level Control
™High-Cut (Low-Pass) Filter Switch £ External Trigger Input
¢ Audio-Sense On/Off Switch
¡Subwoofer-Level Control: Volume may be adjusted using the Subwoofer- Level Control. Turn the control clockwise to increase the SUB-TS15’s volume, or counterclockwise to decrease it.
™High-Cut (Low-Pass) Filter Switch: Placing this switch in the ON position acti- vates circuitry that cuts out all audio input signals above 120Hz. This allows the SUB- TS15 to focus its power on reproducing the low-frequency portion of the signal, avoiding
∞Phase Switch
§Line-Level Subwoofer (SUB) Input ¶ Line-Level Full-Range Inputs
• Speaker-Level Outputs
inefficiency and distortion. Engage this filter when using the Speaker-Level Inputs ª, or when using the Line-Level Full-Range Inputs ¶, unless your receiver or processor processes its line-level output using a low- pass filter. The filter has no effect when the SUB Input § is used.
£External Trigger Input: Use the sup- plied mini-plug cable to connect the trigger output of another compatible product to this jack. Whenever a trigger signal between
ªSpeaker-Level Inputs ‚ Master Power Switch ⁄ AC Power Cord
3 and 30 volts (AC or DC) is detected, the SUB-TS15 amplifier will turn on, even when the Audio-Sense feature has been activated by placing the Audio-Sense On/Off Switch
¢in the AUTO position. The amplifier will remain on for about 10 –15 minutes without a trigger signal.
¢Audio-Sense On/Off Switch: When placed in the AUTO position, and when the Master Power Switch ‚ is turned on, the SUB-TS15 will automatically turn itself on or
SUB-TS15 SUBWOOFER AMPLIFIER PANEL CONTROLS AND CONNECTIONS 5