Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1	Push the OPEN 2 slider to open the player.
2	Insert an audio CD, printed side up, by pressing the
	CD onto the hub.
3	Close the player by pressing the lid down.
4	Press 2; to switch the player on and start playback.
	yThe current track number and elapsed playing
	time are displayed.
•	You can pause playback by pressing 2;.
	yThe time at which playback was paused starts
	ﬂashing.
•	You can continue playback by pressing 2; again.
5	Press 9 to stop playback.
	yThe total number of tracks and the total playing
	time of the CD are displayed.
6	Press 9 again to switch the player off.
•	To remove the CD, hold it by its edge and press the
	hub gently while lifting the CD.

Selecting a track and searching

Selecting a track during playback

•Brieﬂy press ° or ¤ once or several times to skip to the current, previous or

next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ° or ¤ once or several times to select the desired track. The track number is displayed.

2Press 2; to start CD play.

yPlayback starts with the selected track.

1Keep ° or ¤ pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low volume. After 2 seconds the search speeds up.

2Release the button when you reach the desired passage. yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.

–In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.

Note: If there is no activity, the set will automatically switch off after a while to save energy.