Brother CS 8060 manual Cutting the thread, When you have finished sewing, cut the threads

Cutting the thread

When you have finished sewing, cut the threads.

1When you wish to finish the stitching and the sewing machine is stopped, press (needle position button) once to raise the

needle.

1

1Needle position button

XThe needle is raised.

2Raise the presser foot lever.

1

1Presser foot lever

3Pull the fabric to the left side of the machine, and then pass the threads through the thread cutter to cut them.

1

1Thread cutter

■Using the thread cutter button

(Only for models equipped with the thread cutter button)

When using a model equipped with a thread cutter button, the thread can easily be cut if the button is pressed.

1When you wish to finish the stitching, press

(thread cutter button) once.

1

1Thread cutter button

XThe threads are cut and the needle is raised.

2Raise the presser foot lever.

1

1Presser foot lever

CAUTION

●Do not press the thread cutter button after the threads have already been cut, otherwise the needle may break, the threads may become tangled or damage to the machine may occur.

Note

●Do not press the thread cutter button if there is no fabric under the presser foot or while the machine is sewing, otherwise damage to the machine may occur.

●When sewing with thread thicker than #30, nylon or metallic threads, or other special threads, use the thread cutter on the side of the machine to cut the threads.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Sewing 49