Brother CS 8060 manual Removing the presser foot holder

Removing the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder.

■Removing the presser foot holder

1Remove the presser foot.

•For details, refer to “Replacing the presser foot” (page 35).

2Useholderthescrew.screwdriver to loosen the presser foot

2

1 3

1Screwdriver

2Presser foot holder

3Presser foot holder screw

■Attaching the presser foot holder

1Align the presser foot holder with the lower- left side of the presser bar.

2Hold the presser foot holder in place with your right hand, and then tighten the screw using the screwdriver in your left hand.

1Screwdriver

Note

●If the presser foot holder is not correctly installed, the thread tension will be incorrect.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Replacing the Presser Foot 37