Brother CS 8060 manual Sewing thick fabrics

SEWING BASICS ———————————————————————————————————————————————————

Sewing thick fabrics

■If the fabric does not fit under the presser foot If the fabric does not fit easily under the presser foot, raise the presser foot lever even higher to bring the presser foot to its highest position.

■If thick seams are being sewn and the fabric does not feed at the beginning of stitching

Zigzag foot “J” is equipped with a feature that keeps the presser foot level.

1

1 Sewing direction

1When you encounter a seam that is too thick to feed under the foot, raise the presser foot lever.

2Press the black button on the left side of the foot. Keep the button held in and lower the presser foot.

3Release the button. The foot will lock in place level with the seam, allowing the fabric to feed.

XOnce the trouble spot has been passed, the foot will return to its normal position.

CAUTION

●If fabric more than 6 mm (15/64 inch) thick is sewn or if the fabric is pushed with too much force, the needle may bend or break.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

54