Brother CS 8060 manual 4Lower the needle-changing tool, Needle can be removed from the needle bar

GETTING READY ———————————————————————————————————————————————————

4Lower the needle-changing tool.

XThe needle can be removed from the needle bar.

5Insert the new needle into the hole in the needle-changing tool.

Insert the needle with the flat side of the needle toward the rear of the machine.

6Lift up the needle-changing tool so that the fork hooks onto the needle clamp screw.

7Insert the needle until it touches the needle stopper, and then use the screwdriver to tighten the needle clamp screw.

XThe needle is installed.

8Lowerneedle.the needle-changing tool off of the

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

34