Brother CS 8060 manual Install the twin needle in the same way

6While holding the needle with your left hand, use the screwdriver to tighten the needle clamp screw.

Install the twin needle in the same way.

CAUTION

●Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.

■Using the needle-changing tool

Use the enclosed needle-changing tool to replace the needle as described below.

1Pass the needle through the hole in the needle-changing tool.

2Lift up the needle-changing tool so that the fork hooks onto the needle clamp screw.

3Using the screwdriver, loosen the needle clamp screw.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Replacing the Needle 33