Brother CS 8060 manual Extra spool pin is now installed, Remove the needle, 3Install a needle

4Thread the thread cassette with the thread from the spool on the extra spool pin.

•For more details, refer to “Loading the spool into the thread cassette” (page 19).

5Insert the thread cassette (with the extra spool pin attached) into the thread cassette compartment.

Use both hands to press down on both sides of the extra spool pin.

XAt the same time that the thread cassette is inserted, the needle is threaded.

XThe extra spool pin is now installed.

Thread the needle manually (without using the needle threader)

When using special thread, thread with a thickness of 130/20 or less, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below.

1Remove the needle.

•Refer to “Replacing the needle” (page 32).

•When using the wing needle, the twin needle or thread that cannot be used with the needle threader, be sure to remove the needle, otherwise the machine may be damaged.

2Check that the thread cassette indicator is lit up in green, and then insert the thread cassette into the thread cassette compartment.

•For details, refer to 1 through 2 (page 22).

XPass the thread through the needle bar thread hook.

1

1Needle bar thread hook

3Install a needle.

• Refer to “Replacing the needle” (page 32).

4Pass the thread through the eye of the needle from front to back.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Upper Threading 25