PLAYING A CD+G (COMPACT DISC + GRAPHICS) KARAOKE DISC
You can listen to a CD+G karaoke disc. CD+G discs combine the recorded music with an additional video track that displays the song lyrics on a television screen. As the song plays, the words to be sung are highlighted in a different color on most CD+Gs.
Insert a CD+G disc. Insert the microphone(s) into the MIC jack(s). Make sure the unit is connected to a TV or TV and stereo as shown on pages 6 and 7.
Press the PLAY/PAUSE ( ) button to start CD+G playback;®p the CDG indicator will light and the image and lyrics will appear on the external TV, if connected.
1
2
Adjust the MIC VOLUME control as desired. Increasing this control
will increase the volume of the microphone❶ . Adjust the ECHO control to add an echo effect to your voice. The ECHO control is variable so❷ add as much or as little reverb as desired. Sing or❷ talk into the microphone and you will hear both the CD+G and the microphone.
NOTE: The Program and Repeat features on a CD+G disc operate the same as with standard CDs.
INFORMATION ABOUT CD+G KARAOKE DISCS:
CD+G Karaoke discs are designed specifically for playback in special CD players that include a CD+G decoder, such as this unit. These discs contain the lyrics to each song and the lyrics will appear on your TV screen, line by line, as the disc is playing. Usually the words on the screen will change color in time with the music to help you sing along at the proper tempo, even if you do not know the song.
Some CD+G Karaoke discs have all of the songs recorded twice, first with music only, and then with music and vocals together. (This type of recording is called a “Multiplex” recording.) For example, if you purchase a CD+G disc containing four songs, tracks one through four may have the music only without vocals, and tracks five through eight might have the same four songs recorded with music on the left channel and the vocal tracks on the right channel.
MICROPHONE FEEDBACK:
“Feedback” is a howling or screeching sound that occurs when the microphone comes too close to the speaker(s). To avoid microphone feedback, keep the microphone as far away from the speakers as the microphone cable will allow. If you must bring the microphone close to the speakers, such as when you are changing a disc or adjusting one of the other controls on the front of the unit, set the microphone ON/OFF switch to the OFF position.
13