Mute, Set the Clock, Release | Metrik Mobile Electronics MCD-479

8.0Mute

Press MUTE (13) to silence the receiver. Press again to resume listening.

9.0Set the Clock

10.1	Press and hold DSP button (11) for three seconds until the display flashes.
10.2	Press	(7) to change hours,	(6) to change minutes.

10.0Release

Press REL button (25) until "tack" sound is heard, then the left-hand side of the panel will be ejected.

11.0Reset Button Function

RESET button (26) is placed on the housing and must be activated with either a ball-point pen or thin metal object. The RESET button (26) is to be activated for the following reasons:

11.1Initial installation of the unit when all wiring is completed.

11.2All the function button didn't operate

11.3Error symbol on the display.

12.0Remote Sensor (Optional)

For remote control version of unit, there is a remote sensor behind the lens to receive the signal commands from remote handset.