Jwin JX-CD290 Hold Function, Listening with Headphones, Playing a Disc, Track Search

Page 4

THE HOLD FUNCTION

It is useful during playing, the function will lock the key on the panel to protect the mistake in the Playing.

During playing slide the HOLD switch to “ON” position, the “HOLD” will appear in the display, the key on the panel will be locked, the panel key is disabled.

Slide the HOLD Switch to “OFF” position to stop the function.

LISTENING WITH HEADPHONES

Connect the plug of the stereo headphone into the headphone jack (marked phones) before use the unit.

CAUTION: Hearing experts advise against exposure to continuous extended play at loud volume levels while using headphones, possible hearing loss may result. If you experience a ringing in the ears, reduce volume or discontinue use. We want you listening for a life time.

PLAYING A DISC

Be sure to reduce the volume before plugging in or unplugging the headphones/ earphones

1.Plug the cord from a pair of headphone/earphone into the PHONES jack.

2.Slide the Door Open button to open the CD door.

3.Hold the disc with the label side up and press it onto the spindle until it “clicks” into place.

4.Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin, the display will indicate “01”, play will begin immediately from track number 1.

5.Adjust the volume as desired.

6.Set the BASS BOOST function as desired.

7.To stop play temporarily, press the PLAY/PAUSE button.

The elapsed playing time flashes in the display.

Press the PLAY/PAUSE button again to resume.

8.To stop play, press the Stop Button, and the power turns off automatically after a

while.

Note: Both 8cm and 12cm discs can be played in the unit.

Place only one disc at a time in the CD compartment.

TRACK SEARCH

Press the and button during play to skip to the desired track.

Press the to skip to the next track on the disc.

Press the to skip to the beginning of the track currently playing.

Press the twice or more to skip to previous tracks.

FORWARD/REVERSE SEARCH

Press and hold the skip ( ) button during play to scan the disc at high speed. When the desired section of the disc is found, release the button. Normal play will resume.

----forward ----reverse

If you press and hold the skip button ( ) while playing, it will scan the current playing track forward at high speed.

If you press and hold the skip button ( ) while playing, it will scan the current playing track backwards at high speed.

3

Image 4
Contents Portable Compact Disc Player Control Operation and Function Power Supply Location of ControlsDC Operation Charging and USE of Rechargeable BatteriesAuto Power on Function Auto Power OFF FunctionListening with Headphones Hold FunctionPlaying a Disc Track SearchBass Boost Programmed PlaySingle Track Repeat ALL Tracks REPEAT/CONTINUOUS PlayConnecting to Home Stereo Systems Cleaning Cleaning the Pickup LensCleaning the Cabinet Random or Shuffle PlayCleaning Discs Technical SpecificationsCD Player Section CircTrouble Shooting Guide Symptom Cause Solution