Jwin JX-CD290 Bass Boost, Programmed Play, Single Track Repeat, ALL Tracks REPEAT/CONTINUOUS Play

Page 5

BASS BOOST

Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, some- times, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature.

ON OFF

BASS BOOST

PROGRAMMED PLAY

The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed.)

During programming, “PROG” flashes in the display. NOTE: Programming is possible in the STOP mode.

Program number

1

2

3

 

 

 

 

Track number

3

5

9

 

 

 

 

1.Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display.

2.Press the skip button ( ) to select the first track to be programmed.

3.Press the PROGRAM button again to enter the track into the memory.

4.Repeat steps 2 to 3 to program other track till you finish.

5.After programming is finished, press the PLAY/PAUSE Button.

Note: Programmed play will begin automatically if you program 24 tracks. “PROG” shows steady in the display and programmed play begins.

6.The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button.

The programming will be cleared if

1.Open the door

2.Power off

3.After random play

4.To check the program, press the STOP Button and then the PROGRAM button.

THE CD MODE BUTTON

This button can be pressed during play to accomplish many different kinds of play.

CD Mode button pressed

Once for single track repeat. Twice for all tracks repeat.

3 times for INTR play.

4 times for RANDOM (SHUFFLE) play.

5 times for return to normal play.

SINGLE TRACK REPEAT

Press the CD Mode button once during play, and the “ 1” will appear in the display. The current track will be played over and over again until Stop button is pressed.

ALL TRACKS REPEAT/CONTINUOUS PLAY

Press the CD Mode button twice during play. And the “ ALL” will appear in the display. The all tracks on disc will be played over and over again until Stop button is pressed.

INTRO PLAY

Plays the first 10 seconds of all tracks once, then stops.

This is useful if you do not remember the song titles.

1.During playback press the STOP button.

2.Press the CD Mode button 3 times.

3.Press the PLAY/PAUSE button and wait for a while.

4

Image 5
Contents Portable Compact Disc Player Location of Controls Control Operation and Function Power SupplyDC Operation Charging and USE of Rechargeable BatteriesAuto Power OFF Function Auto Power on FunctionHold Function Listening with HeadphonesPlaying a Disc Track SearchProgrammed Play Bass BoostSingle Track Repeat ALL Tracks REPEAT/CONTINUOUS PlayCleaning Cleaning the Pickup Lens Connecting to Home Stereo SystemsCleaning the Cabinet Random or Shuffle PlayTechnical Specifications Cleaning DiscsCD Player Section CircTrouble Shooting Guide Symptom Cause Solution