Getting Started, AC Operation, Battery Operation

Portable CD Player with AM/FM Radio

V10M10_IM_EN_04242009

GETTING STARTED

AC Operation

Before operating the JX-CD427, make sure that the voltage on the unit corresponds to the voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end into a standard AC outlet.

1.In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.

2.When not in use, unplug the AC power cord from the AC power socket.

ÂThe mains plug is used as disconnect device, the disconnect device shall remain readily operable.

Battery Operation

Disconnect the AC Cord. Open the BATTERY compartment and insert 6 x “C” or UM2 batteries (not included) making sure that the battery polarity (+/-) is observed.

Remove the batteries if the unit will not be used for a long period of time.

Antenna

For best FM reception, fully extend the FM ANTENNA. For AM reception, the unit has a built-in antenna, relocate or turn the whole unit for best reception.