Portable CD Player with AM/FM Radio | V10M10_IM_EN_04242009 |
OPERATING INSTRUCTIONS
Audio CD Playback-continued
SKIP AND SEARCH MODE
1.In play or pause mode, when the SKIP/SEARCH buttons are pressed once, the player will advance to the next track or return to the beginning of the track.
2.During play mode, when the SKIP/SEARCH button are pressed and held, it will search the track with audible
REPEAT MODE
1.Repeat 1:
When the REPEAT button is pressed once, the REPEAT indicator light will blink continuously. This single track of music will be repeated.
2.Repeat All:
When the REPEAT button is pressed twice, the REPEAT indicator light will light. The whole disc will be played continuously.
3.To cancel the Repeat Function
Press the REPEAT button repeatedly until the REPEAT Indicator light disappears.
PROGRAM MODE
1.During the CD stop mode, press the PROGRAM button once. The PLAY/PROGRAM indicator light and the number of the program to be memorized starts from the first program “01” will blink continuously on the LED SCREEN.
2.Press the SKIP/SEARCH buttons to your desired musical track, the LED SCREEN will show the appropriate track number. Press the PROGRAM button to store this track in memory.
3.Repeat the above procedure until all desired tracks have been programmed. A total of 20 tracks can be stored in memory.
Note: When the SKIP/SEARCH buttons are pressed, it will always show the last programmed track first to recall your memory.
4.Press the PLAY/PAUSE button once to start the program playback and the CD play (PLAY/PAUSE/PROG) Indicator light will blink continuously
5.To check the program you have stored after complete programming, press the PROGRAM button once during CD stop mode. The LED SCREEN will show the programmed tracks in order. Repeat above procedure to read all the programmed memory.
6.To cancel the programmed memory:
•During the CD stop mode, press the STOP button once, or
•Open the CD DOOR during the CD stop mode.
The PLAY/PAUSE/PROG Indicator light will disappear.
www.jWIN.com