Timer playback
ÖTimer playback of tapes, broadcasts and CDs is possible.
Operations
1 | 3 | 2 | |
|
|
|
|
|
|
|
|
ON/STANDBY | SPEAKER |
|
ILLUMINATION | ||
AHB PRO | /ACS | SOUND |
| PRESET | ONE TOUCH |
AUX | TUNING | REC |
STANDBY AHB PRO ACS BEAT CUT
|
|
|
|
| TIMER |
|
|
| CLOCK | TIMER | ON/OFF |
|
|
| VOLUME |
|
|
|
| BAND |
|
|
|
C D | TAPE | TUNER |
|
| SLEEP |
|
|
| |||
MULTI CONTROL | DOWN | UP | SET | ||
|
|
| |||
|
|
|
|
| PROGRAM |
REW | STOP | FF |
|
|
|
1Set the 
button to ON.
2Set the timer. (Refer to “Setting the timer” on page 23.)
Source sound | Timer mode | Operations |
|
|
|
CD play | CD | Load a disc. |
|
|
|
Tape playback | TAPE | Load a cassette tape. |
|
|
|
Broadcast | TUNER | Tune to the required station. |
|
|
|
3Set the 
button to STANDBY.
ÖTimer playback will start at the timer start time and the power will be switched off at the timer stop time.
The unit remains in the same timer mode even after the power is switched off. The same timer function will repeat at the same time on the following day.
ÖWhen the timer mode is activated, the “ 
” indicator blinks.
ÖWhen the power is switched on, the sound is faded up from volume level 0 (zero) to the preset volume.
ÖTo cancel timer operation
Press the TIMER ON/OFF button so that the timer mode indicator (
) goes out.
Notes:
ÖWhen the volume setting is set to “VOL
ÖTo stop during timer playback, press the 
button to switch the unit off.
Sleep timer operations (using the remote control unit)
A. Use this when you want to fall asleep while listening to a tape, broadcast or CD.
1Set to the required source and tune in a broadcast or play back a CD or tape.
2Press the SLEEP button to set the sleep time.
SLEEP
SLEEP is shown in the display.
Source mode display (Releasing the sleep mode)
ÖSleep time settings of 30, 60, 90 or 120 minutes can be set. When you release the SLEEP button, the source is displayed after 5 sec.
ÖThe sleep timer operation will start and the power will be switched off after the specified time.
ÖChecking the sleep time
When the SLEEP button is pressed, the remaining sleep time is displayed. If it is pressed again, a new sleep time can be set.
ÖTo cancel the sleep timer operation
Press the 
button to switch the power off or press the SLEEP button until the sleep time indicator disappears.
B. To fall asleep while listening to a tape, broadcast or CD and to perform timer playback the following morning
1Set the timer. (Refer to “Setting the timer” on page 23.)
2Set to the required source (tape, broadcast or CD).
3Press the SLEEP button to set the sleep time.
SLEEP
Source mode display (Releasing the sleep mode)
ÖAny source can be selected for sleep timer operation and timer playback. For example;
•CD play for sleep timer operation and broadcast reception for timer playback.
•Tuner play for sleep timer operation and CD play for timer playback.
However, when broadcast reception is selected for both sleep timer operation and timer playback, the station you heard at night will be tuned to the following morning.
25