DeWalt R510 manual Uefi, Qdf#

Dell

Table 18. Intel 5600 Chipset P-State Projections and Turbo Mode Frequency

	QDF#		Frequency	P-state	Turbo Mode	Step-
Processor			(GHz)		Freq (Ghz)	ping
E5503	Q2HH	2.00		Pmin+3	n/a	D0
E5506	Q1GL	2.13		Pmin+4	n/a	D0
E5507	Q2HG	2.26		Pmin+5	n/a	D0
L5520	Q1GN	2.26		Pmin+5	4C/3C: 2.40	D0
					2C/1C: 2.53
E5530	Q1GK	2.40		Pmin+6	4C/3C: 2.53	D0
					2C/1C: 2.66
E5620	Q4EK	2.40		Pmin+6	4C/3C: 2.53	B1
					2C/1C: 2.66
L5609	Q4F8	1.86		Pmin+2	n/a	B1
E5630	Q4EU	2.53		Pmin+7	4C/3C: 2.66	B1
					2C/1C: 2.80
L5640	Q4EQ			Pmin+5	6C/5C: 2.53
		2.26			4C/3C: 2.66	B1
					2C/1C: 2.80
E5640	Q4EV	2.66		Pmin+8	4C/3C: 2.80	B1
					2C/1C: 2.93
E5640	Q4EV	2.66		Pmin+8	4C/3C: 2.80	B1
					2C/1C: 2.93
X5560	Q1GF	2.80		Pmin+9	4C/3C: 3.06	D0
					2C/1C: 3.20
X5650	Q4EJ	2.66		Pmin+8	6C~3C: 2.93	B1
					2C/1C: 3.06
X5660	Q4EN	2.80		Pmin+9	6C~3C: 3.06	B1
					2C/1C: 3.20
X5670	Q4EP	2.93		Pmin+10	6C~3C: 3.20	B1
					2C/1C: 3.33

9.5 UEFI

The UEFI specification abstracts the firmware into protocols and drivers and defines the interface between OS (UEFI compatible) and the UEFI pre-boot applications. The PowerEdge R510 implementation is compliant with UEFI version 2.1. Interfaces are implemented in 64-bit processor mode.

PowerEdge R510 runs UEFI over legacy BIOS. The system BIOS executes, initializing the system and configuring the hardware.

BIOS F2 setup has an option for selecting the desired boot mode: BIOS or UEFI.

PowerEdge R510 Technical Guide 51