Dell

10 I/O Slots

10.1 Overview

The PowerEdge R510 system provides two configurations for I/O slots:

Riser 1 (default offering): Three PCIe slots (x4, x4, x8 bandwidth; all w/ x8 slots) + One internal storage slot (x4 bandwidth w/ x8 slot for SAS or PERC integrated cards only)

Riser 2 (for GPGPU ONLY): One PCIe slot (x16 bandwidth and slot) + One internal storage slot (x4 bandwidth w/ x8 slot for SAS or PERC integrated cards only)

10.1.1Riser 1 Detail

Figure 32. Riser 1

Table 20. Riser 1 Slot Information

Slot Location

Bandwidth

Physical Slot

Height

Length

 

 

 

 

 

Slot1 (Gen2)

PCIe x4

PCIe x8

Full Height

Half Length

 

 

 

 

 

Slot2 (Gen2)

PCIe x4

PCIe x8

Full Height

Full Length

 

 

 

 

 

Slot3 (Gen2)

PCIe x8

PCIe x8

Full Height

Half Length

 

 

 

 

 

Slot4 (Gen2)

PCIe x4

PCIe x8

For dedicated storage controller

 

 

 

 

 

One x4 PCIe Gen2 slot (slot 1, x8 connector with x4 routing) for full-height half-length cards, connected to the IOH

One x4 PCIe Gen2 slot (slot 2, x8 connector with x4 routing) for full-height full-length cards, connected to the IOH

One x8 PCIe Gen2 slot (slot 3, x8 connector with x8 routing) for full-height half-length cards, connected to the IOH

One x4 PCIe Gen2 slot (slot 4, x8 connector with x4 routing) for dedicated storage controller card, connected to the IOH

System supports 25W maximum power for slots 2 and 3 and 15W for slot 1 and 4

The lower power support on slots 1 and 4 is due to system thermal limitations

The PowerEdge R510 does not support hot-swapping of PCIe cards

PowerEdge R510 Technical Guide

53

Page 53
Image 53
DeWalt R510 10 I/O Slots, Riser 1 Detail, Riser 1 Slot Information, Slot Location Bandwidth Physical Slot Height Length