JVC RD-T7RGN, RD-T5RBU Setting the Alarm Timer, Minute Snoozing Snooze, Setting the Sleep Timer

Page 14

■7. Press the CD/TUNER TIMER button.

The current volume level blinks.

■8. Turn the Jog dial to set the volume level.

The volume level changes between “VOL 1” and “VOL 31”.

■9. Press the CD/TUNER TIMER button.

The CD/Tuner timer is set and the Timer 1 indicator

( TIMER1) remains lit.

■■10. Prepare the music source according to the source set in step 6.

CD:

Load a CD.

TUNER: Tune to a station you want to listen to.

■■11. Turn off the Unit (Standby mode).

•When the set time comes, the Unit automatically turns on and plays the source. During this time, the Timer 1 indicator

( TIMER1) blinks.

To cancel the timer, press the CD/TUNER TIMER button to

turn off the Timer 1 indicator ( TIMER1).

To reactivate the timer, repeatedly press the CD/TUNER TIM-

ER button until the Timer 1 indicator ( TIMER1) remains lit again.

To confirm the timer settings, repeatedly press the CD/TUN-

ER TIMER button.

To change the timer settings, repeat the setting procedure

from the beginning.

Setting the Alarm Timer

The Alarm timer (alarm clock) is turned on at the set time to wake you up. Alarm tone fades in, and 2 minutes later, it’s frequency be- comes higher. The alarm tone continues for 15 minutes and then au- tomatically stops.

Note:

•Perform each setting step within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.

(On the Unit)

■1. Press the ALARM TIMER button.

The current hour digits blink. Also, the Timer 2 indicator

( TIMER2) blinks.

■2. Turn the Jog dial to set the hour. ■3. Press the ALARM TIMER button.

The current minute digits blink.

■4. Turn the Jog dial to set the minute. ■5. Press the ALARM TIMER button.

The current alarm tone blinks.

■6. Turn the Jog dial to set the alarm tone level.

The alarm tone level changes between “LEVEL 1” and “LEV- EL 7”.

■7. Press the ALARM TIMER button.

The Alarm timer is set and the Timer 2 indicator ( TIMER2) remains lit.

■8. Turn off the Unit (Standby mode).

•When the set time comes, the Unit automatically turns on and sounds an alarm tone for 15 minutes.

•During sounding an alarm tone, the Timer 2 indicator

( TIMER2) blinks. After that, the indicator remains lit again.

To stop the alarm tone, press the ALARM TIMER button or turn off the Unit.

To cancel the timer, press the ALARM TIMER button to turn

off the Timer 2 indicator ( TIMER2).

To reactivate the timer, repeatedly press the ALARM TIMER

button until the Timer 2 indicator ( TIMER2) remains lit again. To confirm the timer settings, repeatedly press the ALARM TIMER button.

To change the timer settings, repeat the setting procedure

from the beginning.

5-Minute Snoozing (SNOOZE)

When the CD/Tuner timer or Alarm timer turns on, if you wish, ac- tivate 5-minute snoozing function to temporarily stop playing source or sounding an alarm tone.

While the timer is activating, press the SNOOZE button. CD/Tuner timer: The Unit turns off for 5-minute for snoozing. Alarm timer: The alarm tone stops for 5-minute for snoozing.

Note:

•The maximum number of times to repeat snoozing for the CD/ Tuner timer is limited to 10.

.

Setting the SLEEP Timer

Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your Unit will turn off by itself rather than play all night.

■You can only set the Sleep Timer when the Unit is on and a source is playing.

■1. Play back a CD or tune in to a desired sta- tion.

■2. Press the SLEEP button.

The “SLEEP” indicator blinks.

■3. Set the length of time you want the source to play before shutting off.

•Each time you press the SLEEP button, it changes the

number of minutes shown on the display in this sequence:

=10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to the beginning)

The “SLEEP” indicator will stop blinking after 5 seconds and re- mains on. Then, the display returns to the one before you set the Sleep Timer.

The Unit is now set to turn off after the number of minutes you have set.

To Confirm the Sleep Time

When the SLEEP button is pressed, the remaining sleep time is dis- played. After 5 seconds the original display returns.

To Cancel the SLEEP Timer Setting

Press the SLEEP button until the “SLEEP” indicator goes off on the display. Turning off the Unit also cancels the SLEEP Timer.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RD-T7RGN RD-T5RBU Important for Laser Products Above ALL Table of Contents Using the Remote Control RD-T7RGN Only AccessoriesHow To Put Batteries Getting StartedAdjusting the Volume Connecting the AC Power CordTurning the Power On and Standby Common OperationsReinforcing the Bass Sound AHB PRO RD-T7RGN Only Adjusting the Brightness Dimmer RD-T7RGN OnlyUsing Batteries Tone Control BASS/TREBLEPresetting Stations Using the TunerTuning In a Station One Touch Radio AC power onlyManual Presetting Using the Re- mote Control To Change the FM Reception ModeManual Presetting Using the Unit Repeat steps 1 3 for further presettingTo show the RDS signals on the display Receiving FM Stations withUsing the CD Player Normal PlayStop mode, press the RANDOM/REPEAT button Random PlayRepeat Play Stop mode, press the Repeat buttonSetting the CD/Tuner Timer Using the TimersSetting the Clock Minute Snoozing Snooze Setting the Alarm TimerSetting the Sleep Timer Moisture Condensation Care And MaintenanceCompact Discs General NotesTroubleshooting Specifications

RD-T7RGN, RD-T5RBU specifications

The JVC RD-T5RBU and RD-T7RGN are impressive additions to the portable audio market, catering to users seeking superior sound quality combined with modern features. Both models reflect JVC's commitment to delivering outstanding performance while maintaining portability and ease of use.

The JVC RD-T5RBU comes equipped with a powerful 20W audio output, delivering clear and vibrant sound across various music genres. It features dual 2.5-inch full-range speakers, which provide a balanced and immersive listening experience. The model integrates an advanced digital amplifier that enhances sound clarity and reduces distortion, ensuring that every note is heard with precision.

On the other hand, the RD-T7RGN takes it a step further with a higher audio output of 30W. This model boasts dual 4-inch woofers, which deepen the bass response and enrich overall audio quality. The RD-T7RGN is particularly well-suited for outdoor use or larger spaces, where its robust sound can fill the room seamlessly.

Both devices leverage Bluetooth technology, allowing users to stream music wirelessly from compatible devices. The Bluetooth connectivity provides a hassle-free experience, making it easy to play music directly from smartphones, tablets, or laptops. Additionally, they come with built-in FM radio functionality, giving users access to their favorite radio stations anytime.

Another significant feature of the JVC RD-T5RBU and RD-T7RGN is their impressive battery life. With the ability to play music for several hours on a single charge, these models are perfect for outdoor gatherings, picnics, or just lounging at home. The inclusion of USB ports allows for charging devices, ensuring that users remain connected while enjoying their favorite tracks.

Furthermore, the design of both speakers is user-friendly, featuring straightforward controls for volume, track selection, and source switching. The compact and durable build ensures that they can withstand the rigors of portable use, making them ideal for various environments.

In conclusion, the JVC RD-T5RBU and RD-T7RGN stand out in the portable audio market with their impressive sound capabilities, modern connectivity options, and user-oriented designs. Whether you’re an audiophile or a casual listener, these models offer excellent value and solid performance for all your audio needs.
Top Page Image Contents