JVC RD-T5RBU, RD-T7RGN manual Using the Timers, Setting the Clock, Setting the CD/Tuner Timer

■Using the Timers

SNOOZE/	SNOOZE	SLEEP
				SLEEP
DIMMER	1	2	3
	4	5	6
	7	8	9
	10	+10	REPEAT	SLEEP
	TUNER		CD	STANDBY/ON	CLOCK/	SLEEP
	BAND				DISPLAY
				CLOCK/DISPLAY	STANDBY
	FM MODE				TIMER
				CD/TUNER TIMER	CD/TUNER	ALARM
	BASS/TREBLE		AHB PRO	ALARM TIMER
				SNOOZE/DIMMER
	VOLUME
				SNOOZE/DIMMER
	REMOTE CONTROL RM-SRDT7			[RD-T7RGN]
				SNOOZE

[RD-T7RGN Only]	[RD-T5RBU]	Timer 2 indicator
		Timer 1 indicator

The timers let you control listening a music source as well as an alarm tone.

Three types of timers are available.

CD/Tuner Timer ( TIMER1):

Use this timer to wake you up to music from a CD or tuner.

Alarm Timer ( TIMER2):

Use this timer as an alarm clock.

Sleep Timer:

Use this timer to fall asleep to music. Your System turns off auto- matically after a certain length of time.

CAUTION: If memory backup batteries are ex- hausted or not installed, and the AC power cord is disconnected or there is a power failure, time set- tings will be erased from memory in approx. half a day. Then, the display blinks “0:00”. If this hap- pens, set the current time (clock) and perform the timer setting again.

Setting the Clock

When the Unit is operated on AC power or batteries for the first time, the time indication “0:00” will blink on the display and you need to set the clock.

You can set the clock whether the Unit is turned on or off (Standby) if the AC power is supplied to the Unit.

Notes:

•The clock must be correctly set for the timer to work.

•The clock may gain or lose 1 to 2 minutes per month.

•Perform each setting step within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.

	MULTIJOG		MULTIJOG
CLOCK/	VOLUME	CLOCK/	VOLUME	CLOCK/
DISPLAY		DISPLAY		DISPLAY

(for 3 sec)

	MULTIJOG
	VOLUME
CD PORTABLE SYSTEM		Jog dial
RANDOM/	BASS/
AHB PRO REPEAT	TREBLE
	P.TUNING
CD	TUNER BAND

SLEEP indicator

(Display when using the Timer)

(On the Unit)

■1. Press the CLOCK/DISPLAY button for 3 sec- onds or more.

The hour digits blink.

■2. Turn the Jog dial to set the hour. ■3. Press the CLOCK/DISPLAY button.

The minute digits blink.

■4. Turn the Jog dial to set the minute. ■5. Press the CLOCK/DISPLAY button.

“CLOCK OK” appears for 2 seconds. The selected time is set

and the seconds start counting from 0.

.

Setting the CD/Tuner Timer

The CD/Tuner timer is turned on at the set time so that you can wake up to music from a CD or tuner. The volume fades in when the Unit turns on. The System will automatically turn off in 1 hour.

Note: Perform each setting step within 30 seconds. Otherwise, setting is cleared and the procedure must be repeated from the beginning.

(On the Unit)

■1. Press the CD/TUNER TIMER button.

The current hour digits blink. Also, the Timer 1 indicator

( TIMER1) blinks.

■2. Turn the Jog dial to set the hour. ■3. Press the CD/TUNER TIMER button.

The current minute digits blink.

■4. Turn the Jog dial to set the minute. ■5. Press the CD/TUNER TIMER button.

The current source name blinks.

■6. Turn the Jog dial to set the source.

The source name alternates between “CD” and “TUNER”.

10