Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. you
may also program a specific track to play several times within the same program if desired.
lvote: The player cmnot be programmed white a disc is ptaying. tf a disc is playing
press the sroP button to stop playback before you begin the programming
steps below.
1.) lnsert your disc in the player, close the door, and wait until the total number of tracks appears in the display.
2.) Press the PRoGMM button once. The MEMoRy indicator ftashes and Program Number 01(P01) appears briefly, then the track number disptay(0O) begins flashing together with the MEMORY indicator.
tl, | ltt | |
MEMORY | ||
MEMORY | ||
ttt | ||
,ll | ||
ltt |
|
POp,q
aal
3.) Press the SKIP Dl' l(<
or buttons to select the first track number you wish
to program.(Example: Track 07)
ltt
MEMORY ,]t
\tt
n1
U'
,lt
4')when track number 07 is flashing in the disptay press the pRoGRAM button
once again to enter track number 7 in program Memory number 1. The display
will briefly show P02 and then track indicator 00 begins flashing again.
5.) Press the SKIP >+l or l( buttons to select the next track number you wish to program.(Example: Track 10)
6.) wrren the desired track number is flashing in the display press the PROGRAM
button again to enter the track in the program memory.
7')Repeat steps 5 and 6 untilyou have entered up to 20 tracks in the program
memory.
8.) To begin programmed ptayback press the pLAy/pAUsE button. The
MEMORY indicator stops flashing and remains in the disptay. playback wiil
begin on the first track that you programmed and continue until the last
programmed track has played. The display will then show the total number
of tracks on the disc and the programmed tracks are cleared from the
memory.
15