CASSETTE TAPES
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device.
On the back of the cassette there is an erase prevention tab on each side. To prevent accidental erasing, break out these tabs with a screwdriver. If only one side of the tape is to be protected, break out the tab on the left side with the side desired facing you.
To record on a tape in which the tab has been broken, place a piece of adhesive tape over that area.
NOTE: When a tab is broken out, the record button cannot be depressed.
Tab for side 2
Tab for side 1
Tab
Break out the tab to prevent recording
Cover with tape to record again
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15
If there is any slack in the tape in the cassette, it should be removed before inserting the cassette. Place a pencil in one of the hubs and rotate clockwise until all slack is taken up.
15