OPERATING INSTRUCTIONS (CONTINUED)
MAKING A TAPE RECORDING
The tape recorder in this unit allows you to make direct recordings from the radio or CD player to a blank cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically control the volume level of your recordings to prevent distortion. You may change the settings of the VOLUME control or the BASS BOOST button during a tape recording, as these controls have no effect on the material being recorded onto the tape.
To make a tape recording, proceed as follows:
1 | Open Surface Side |
| Full Reel on Right |
2 |
3 |
Open the Cassette Door and insert a good quality blank cassette tape into the slots on the door, with the open end facing up and the full reel on the
Press the FUNCTION button to select the function you wish to record, either radio or CD, and operate that function according to its own instructions.
When you are ready to begin recording, press the cassette RECORD (
) button. The cassette PLAY (Ã) button will also engage. The tape will begin moving and all of the material from your selected source will be recorded on the tape.
4 |
5 |
To avoid recording unwanted material, such as radio commercials, use the PAUSE (
) button to stop the recording temporarily. Release the pause ( 
) button to begin recording again.
When you are finished recording, press the STOP/EJECT ( 
) button to stop the tape.
14