LISTENING TO THE RADIO
1.) Press the POWER button on the main unit or the remote control. The main display turns on and the STANDBY indicator goes “Off”.
2.) If necessary, press the FUNCTION button on the top panel of the main unit or the remote control to select the Tuner function. The display will show an AM or FM station frequency. To select a different band, press the STOP/BAND button again.
3.) Tune to the desired frequency as follows:
•Manual Tuning
Repeatedly press the F.SKIP / R.SKIP buttons on the top panel of the main
unit or 
/ 
buttons on the remote control until the frequency of the desired station appears on the display.
•Automatic Tuning
Press and hold the F.SKIP / R.SKIP buttons on the top panel of the main unit
or 
/ 
buttons on the remote control until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your desired station.
4.) Adjust the VOLUME, EQ and DBBS controls as desired.
5.) If you tuned to an FM Stereo station the ST indicator will appear in the main display. If the reception is noisy or weak, switch the FM ST/MONO selector on the back panel to select FM Mono mode. The ST indicator will disappear. The reception will normally improve although the sound will no longer be in stereo.
6.) When you are finished listening press the POWER button on the main unit or remote control to return to the Standby (Power Off) mode. The main display goes off and the time display reappears.
13
PD5802_ib031803.p65 | 13 |
18/3/2003, 11:06