Playing Compact Discs

IMPORTANT:

This CD player can play normal CDs plus CD Recordable (CD-R) and CD Rewriteable (CD-RW) discs. However the playability of CD-R and CD-RW discs may be affected by the type of software that was used in ‘ripping’the tracks from the original discs and ‘burning’the tracks onto the blank media. Playability may also be affected by the quality and condition of the blank media you use for recording. 100% compatibility cannot be guaranteed. This is not an indication of any problems with your player.

1.) Press the POWER button to turn the system ‘On’.

2.) Press the FUNCTION button on the top panel of the main unit or the remote controls to select the CD function.

3.) Press the OPEN/CLOSE position on the CD door to open the CD door. The main display shows “– – – –”. If you have not already done so, remove the ‘dummy CD’from the player and discard it.

4.) Place a CD on the center spindle with the printed label side facing upward.

5.) Close the CD door. The disc will spin and ‘00 00:00’will flash in the display as the player reads the table of contents on the disc. Within a few seconds the disc will stop spinning and the display will show the total playing time and total tracks on the disc.

Note: If the disc is inserted upside down or if the disc is badly scratched and unreadable, playback will not be possible. In this case the main display will show “no dISC”. Remove the disc and re insert it properly, or try another disc.

6.) Press the PLAY/PAUSE button on the top panel of the main unit or on the remote control to begin playback on track 1. The display will show the elapsed playing time of each track as it plays.

7.) Adjust the VOLUME, EQ and DBBS controls as desired.

PD5802_ib031803.p65

18/3/2003, 11:06