PLAYING CASSETTE TAPES
1.) Open the cassette door by pressing the STOP/EJECT 
key.
2.) Place a
3.) Slide the function AM/FM ST./TAPE/CD selector switch to the TAPE position,
4.) Press the cassette PLAY 
key to begin playback.
The POWER Indicator comes ‘On’.
5.) Adjust the VOLUME and BASS BOOST control as desired.
6.) To advance the tape rapidly press the F.FWD 
key. To stop the tape before it
ends press the STOP/EJECT 
key.
7.) To rewind the tape rapidly press the REWIND 
key. To stop the tape before
it ends press the STOP/EJECT 
key.
8.) When the tape ends the Automatic Stop System releases the PLAY 
key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape and close the door. If you are playing a tape and then switch to the AM, FM ST.
or CD function be sure to press the STOP/EJECT 
key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism.
15
PD3811BL_060304.p65 | 15 |
3/6/2004, 18:01