Audiovox CE1000X instruction manual Basic Disc Play, LCD Display Information, Cleaning Discs

Page 4

CLEANING DISCS

Finger prints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge.

Never use thinner, benzene, record cleaner or anti-static spray on a compact disc. Such chemicals can damage its plastic surface.

BASIC DISC PLAY

The Compact Disc Player can play Audio Discs such as CD-Recordables and CD- Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

1.Connect the headphones to the PHONES (GREEN) socket.

2.Press the OPEN button to open the CD compartment lid.

3.Adjust the VOLUME to minimum.

4.Insert the disc with the label side facing up.

5.Close the lid securely until a click is heard.

6.Press the PLAY button to start playing.

LCD DISPLAY INFORMATION

When power is applied to the unit

• If disc is in, auto adjustment is started. During adjustment,

display shows - -.

• If no disc, then disc is displayed. Put the disc and close

the lid, then the player starts auto adjustment again.

• If the lid is opened, the display shows OPEN. Closing

the lid starts auto adjustment.

• If the player can't read the Table of Contents (TOC) then

Er is displayed.

• When TOC data has been read, the display shows

• Track No. 1 plays automatically. ANTI-SHOCKstarts

flashing.

Increasing the bass

Set the BASS BOOST switch to the ON position.

NOTE: The bass boost performance will be dependent on the VOLUME control setting.

HOLD Switch

This switch prevents accidental selection of an unwanted function during Playback or Stop mode. In the HOLD "ON" position, no function button on the unit can be operated (except OPEN). Moving the switch to the "OFF" position, returns the unit to normal operation.

ON OFF

BASS BOOST

HOLD OFF ON

• If ANTI-SKIP key is pressed, then

disappears.

TO PLAY FROM STOP MODE

Press PLAY/PAUSE button, then the display changes to 01 00:00 and starts play.

When the memory is full, ANTI-SHOCKstops flashing.

TO STOP

Press STOP key and the TOC is displayed.

TO PAUSE

Turning Power on and off

This unit has no ON/OFF switch. To turn on and off, press the following buttons. To turn on:

Press >II PLAY/PAUSE (playback starts). To turn off:

Press STOP button once to standby mode.

If press STOP button twice, it will be turn off the power immediately.

Auto power-off function

When the unit is stopped (standby mode) for approximately 30 seconds, the power is automatically turned off.

6

Press PLAY/PAUSE button, then pause on/off alternately. When the player is paused the time display is flashes. flashing.

7

Image 4
Contents CE1000X 128-6204LCD Display Phones Jack Play/Pause Button Volume Control Battery Power OperationClose the battery compartment cover LOW Battery AlertListening with Headphones Rechargeable Battery OperationCharging and USE of Rechargeable Batteries Handling Compact DiscsBasic Disc Play Cleaning DiscsLCD Display Information REPEAT/PLAY Modes Intro PlayProgram Play Normal PlaybackRandom Play MaintenanceSkip and Search Function Using ANTI-SHOCK and Skip Free Protection Feature Product SpecificationsPick UP Audio