hour) charge.
•After the epilator has been thoroughly charged it is OK to leave it plugged in.
How to operate your epilator (Fig. 2)
Check to see that the skin protector and discs are not damaged or deformed. If they are then please do not use the appliance.
If you are concerned about pain during epilation then please use with 1 (low speed) setting.
Cordless operation of the epilator (ES2029 only)
•Remove the cap.
•Attach the frame you wish to use.
•Slide the switch to the 1 (low speed) or 2 (normal speed) position and carry out epilation.
•After completing epilation, slide the switch to the “0·charge” position.
Operating the epilator on AC power (Fig. 2)
•Slide the on/off switch to the “0·charge” position.
•Insert the power cord securely into the epilator.
•Plug the AC adaptor securely into an electrical outlet. Always check to see that the charge indicator light is on.
•Remove the cap.
•Attach the frame you wish to use.
•Slide the switch to the 1 (low speed) or 2 (normal speed) position and carry out epilation.
•After completing epilation, slide the
8
switch to the “0·charge” position.
•Unplug the power cord from the electrical outlet and the appliance.
Correct usage for best epilation results
•When the hair is long, it makes hair removal easier and reduces pain to trim the hair before epilation. Leg and arm hair should be shortened a length of 3 to 5 mm, and underarm and
•Apply epilator at right angles (90°) against your skin. For best epilation results keep in contact with the skin surface. Press gently and guide the epilator slowly against hair growth. (Fig. 3)
•Rub your skin to lift short hairs.
•Move the epilator slowly on the skin with the skin protector vertically touching.
Epilation attachment without skin protector
Please use Epilation attachment (no skin protector) DD for quicker epilation.
Shaving
For legs and arms
It is helpful to use a shaver head with
For underarms and bikini-line
It is helpful to use a shaver head 3 to 5 days before using the epilator.
Shaving
Before using, make sure the blade is not warped or damaged, as this
may cause injury.
Apply the shaver head so that the whole blade is in close contact with the skin.
Press gently and guide the appliance slowly against hair growth. Applying with too much force prevents hairs from being guided to the blades so that some areas may be left unshaved.
Trimmer
It is helpful to use the trimmer only when you want to cut the long hair.
When the trimmer is up, apply the blade gently.
Shaving with
Further useful tips
•In the beginning, it is advisable to epilate in the evening so that any possible reddening can disappear overnight. When you feel pain or rash appears, cool the skin with cold towel.
•Hair is easier to remove after bathing or showering.
But your skin must be completely dry!
•In order to prevent the risk of ingrowing hairs, we recommend the regular use of massage sponges, e.g. after showering, or exfoliation peelings.
9
Cleaning (Fig. 4)
Switch off and unplug the appliance before cleaning.
Cleaning of the epilation head
Push the frame release buttons and remove the frame.
Brush the frame.
While cleaning, you can turn the epilation discs manually.
Be careful not to break the skin protector when cleaning.
For disinfection of the epilation discs please use only pure alcohol. Attention! Wipe the main body only with a damp cloth. The use of alcohol etc. may cause discoloration or deformation of the main body.
After cleaning, put the cap on the epilation head.
Cleaning of the shaver head (ES2029 only)
Push the frame release buttons and remove the frame.
Remove the inner blade by lifting straight up.
Clean with the brush.
Be careful not to apply too much force to the outer foil.
After cleaning, put the
Replacing the outer foil of the shaver head
Never remove the outer foil for other reason than to change it.
Removing the outer foil
While pushing the outer foil gently
