Panasonic ES2029 Safety precautions, For environmental protection and recycling of materials

(Fig. 6 - ES2029 only)

with the fingers, use the fingernail to release the plastic panel Fb on the blade from the catches Fa on the inside of the frame.

Fitting the new outer foil

For environmental protection and recycling of materials

(ES2029 only)

This epilator contains Ni-MH batteries.

Safety precautions

• Use only the included Adaptor.

• Please use the appliance at a

temperature of between 0~40°C.

• Always ensure the appliance is

operated on an electric power

agent.

• Do not attempt to use a defective

appliance or repair the appliance

yourself. Disassembly and repair

should only be carried out by a

qualified technician.

Holding the outer foil so that the surface with the plastic panel Fb (i.e. the surface that will contact the inner blade) faces upward, insert into the frame so that the catches Fa on the frame fit into the holes on the foil.

ATTENTION:

2 nickel metal hydride batteries that are recyclable power the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle the batteries.

10

How to remove the built-in rechargeable batteries before disposal of the epilator

The batteries in this epilator are not intended to be replaced by consumers. However, the batteries may be replaced at an authorized service center. The procedure described below is intended only for removal of the rechargeable batteries for the purpose of proper disposal.

•Always unplug the power cord from the epilator before disassem- bling it.

•Always slide the switch to 1 or 2 until the batteries are completely discharged.

•Using a screwdriver, disassemble the unit in the following order.

1.Remove the head while pushing on the head release button.

2.Remove screws Fa .

3.Remove cover Fb and cover Fc while pushing on the head release button and then remove cover Fd .

4.Use a screwdriver to remove the Ni-MH batteries.

(Please take care not to allow the batteries to short out on anything.)

source matched to its rated
voltage.
• Never operate the appliance if the
cord or adaptor are damaged or
overly hot, or if the plug fits
loosely in the power outlet.
• Keep the device away from
sources of heat or flame.
• Do not allow the appliance to be
used by, on, or near children.
• Do not allow the appliance to be
used or left in the vicinity of sinks,
bathrooms, or other high-humidity
areas, where it could be exposed
to water and moisture.
• Do not allow the appliance to be
immersed in, splashed with, or
rinsed under water.
• Do not modify the cord or damage
it in any way such as by bending,
twisting or pulling on it
unnecessarily.
• Do not wrap the output cord tightly
around the appliance.
• Regularly	clean the cord
connector, which plugs into the
appliance, to keep it free of dust
and foreign objects such as pins,
etc.
• Replace the shaving foil and the
inner blade when you notice a
reduced shaving performance.
• A damaged or defective appliance
should be returned to the
customer service center or to an
authorized	customer service

11

• The AC adaptor can be positioned

in a vertical or horizontal position.