PD6528 O/M.QXD 1/16/01 3:50 PM Page 11
MAKING A TAPE RECORDING
The tape recorder in this system allows you to make direct recordings from the radio or CD player to a blank cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically control the volume level of your recordings to prevent distortion. You may change the settings of the volume or the
To make a tape recording, proceed as follows:
1 | Open surface side |
| Emptiest reel |
2 |
3 |
Open the Cassette Door and insert a good quality blank cassette tape into the slots on the door, with the open end facing up and the full reel on the
Select the function you wish to record, either radio or CD, and operate that function according to its own instructions.
When you are ready to begin recording, press the cassette Record ( 
) Button. The cassette
Play (➛) Button will also engage. The tape will begin moving and all of the material from your selected source will be recorded on the tape.
4 |
5 |
6 | 1 |
3 |
|
2 | 4 |
|
To avoid recording unwanted material, such as radio
commercials, use the Pause (
) Button to stop the recording temporarily. Release the Pause
( 
) Button to begin recording again.
When you are finished recording,
press the Stop/Eject ( 
) Button to stop the tape.
If you wish to listen to your recording immediately, press the cassette Rewind (❿❿) Button ❶ until the tape rewinds to the beginning, then press the Stop/Eject ( 
) Button ❷. Set the FUNCTION Switch ❸ to the TAPE position and press the cassette Play (➛) Button ❹ to begin playback.
HEADPHONE JACK
Connect a pair of stereo headphones (not included) to this jack for private listening without disturbing others. The
11