Emerson PD6528 instruction manual Repeat Playback, Programmed Playback

PD6528 O/M.QXD 1/16/01 3:50 PM Page 8

REPEAT PLAYBACK

1
￿	1	2

2
	2
￿	2	3
1

3
3
￿
1	2

To repeat all of the tracks on a disc continuously, press the REPEAT Button ❶ once. The Repeat indicator appears in the display. Press the CD PLAY/PAUSE (❿ ) Button ❷ to begin all tracks repeat.

To repeat a single track, press the REPEAT Button ❶ twice. The Repeat 1 indicator will appear in the display. Press the Skip/ Forward ( ) or Skip/Reverse ( ) Buttons ❷ to select the specific track that you wish to repeat. When the desired track number appears in the display,

press the CD PLAY/PAUSE (❿ ) Button ❸ to begin playback. The

specific track you selected will be repeated continuously.

To cancel Repeat Playback, press the REPEAT Button ❶ until the Repeat indicator disappears from the display. You can also cancel Repeat Playback by pressing the CD STOP (■) Button

❷or by setting the FUNCTION Switch ❸ to the TAPE(Off) position.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20-track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

2

3

￿

Set the FUNCTION Switch to the CD position.

Open the CD Compartment door and insert your disc in the CD player. Close the CD compartment door. Wait for the CD player to read the table of contents and display the total number of tracks on the disc.

Press the CD PROGRAM Button. The Program indicator appears in the display and the Program Memory #1 flashes.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

8