Operating Instructions, Setting The Time Of Day

OPERATING INSTRUCTIONS

Setting The Time Of Day

•Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘live’. Do not use an outlet that is controlled by a wall switch.

PROGRAM REPEAT RANDOM POWER

FM ST.

•When the unit is plugged in for the first time the display will show flashing “12:00”(AM).

AL. 1

AL. 2

1.) While the display is ‘flashing’, press the HR. button to set the hour. Be sure to observe the PM indicator to set the hour correctly. If the PM indicator is ‘On’the hour displayed is PM.

2.) Press MIN. button to set the minute correctly.

3.) Press the STOP/TIME button once, the time is set. The display remains ‘On’.

PROGRAM REPEAT RANDOM POWER	FM ST.
PM
AL. 1	AL. 2

Note: You may proceed to re-set the time again by pressing the STOP/ TIME button once during Power-off, FM or AM modes.

Important Notes !!

If you press and hold the STOP/TIME button any time, (except CD mode), the clock will change to European 24-Hour format, and vice versa.

PROGRAM REPEAT RANDOM POWER	FM ST.		PROGRAM REPEAT RANDOM POWER	FM ST.
PM			PM
AL. 1		AL. 2	AL. 1	AL. 2

CKD1137_053105.p65

1/6/2005, 14:22