Power Source, AC Operation, Battery Operation

POWER SOURCE

This CD player can be operated on either 120V 60Hz AC house current with the AC adapter, included, or on 2.4V DC (2 "Ni-MH" rechargable batteries, included).

AC OPERATION

Connect the AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 6V" jack on the side of the player as shown in the following illustration. Do not use any AC adapter other than the one supplied with this unit.

If the AC adapter will not be used for an extended period of time, remove it from the wall outlet by pulling on the adapter housing. Do not remove the adapter by pulling on the cord. Do not touch the AC adapter with wet hands.

AC 120V 60Hz
Outlet	DC 6V
	DC 6V
	Input Jack
AC / DC Adapter

BATTERY OPERATION

1.) Open the battery compartment door (inside the CD com partm ent) by squeezing the two tabs in the direction of the arrows and then lifting the door open. To prevent loss, the door cannot be removed from the unit.

2.) Insert 2 "Ni-MH" rechargable batteries, included into the compartment. Follow the polarity markings inside the compartment. If the batteries are inserted incorrectly the unit will not work.

3.) Close the battery door completely.

Note: In order to operate the player on batteries the AC adapter must be disconnected from the DC IN jack.

HD7090_ib072902.p65

29/7/2002, 18:33