Emerson SMV300 owner manual Repeat Playback, Programmed Playback

SMV300 O/M.QXD 6/21/01 7:46 AM Page 11

REPEAT PLAYBACK

1

2

1

2

2

1

3	3
2	2
	1

To repeat all of the inserted discs continuously, press the REPEAT button ❶ once. “ALL DISC” will appear in the display. Press the PLAY/PAUSE (❿ ) button ❷ to begin all discs repeat.

NOTE:

To repeat all of the tracks on a disc continuously, press the REPEAT button ❶ twice. “1 DISC” will appear in the display. Press the PLAY/PAUSE (❿ ) button ❷ to begin all tracks repeat.

To repeat a single track, press the REPEAT button ❶ a third time. “1” will appear in the display. Press the TUNING/SKIP/ SEARCH ( ) or ( ) button ❷ or the Number buttons ❸ on the remote to select the specific track that you wish to repeat. The specific track you selected will be automatically played and repeated continuously.

To cancel Repeat Playback, press the REPEAT button repeatedly until the Repeat indicator disappears from the display.

PROGRAMMED PLAYBACK

The CD player in this unit has a 40-track programmable memory that allows you to program up to 40 tracks on any disc for playback in any desired order. You may program 40 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1 2

Press the CD/SELECT Function	Open the CD Compartment doors
button.	and insert your disc(s) in the
	compartments. Close the CD doors.
	Wait for the CD player to read the
	table of contents and display the
	total number of tracks on the disc.

3

2

1

Press the PROG/MEMORY button ❶; the display will show “00 P-01” and “MEMORY” will blink.

Select a disc using the CD/SELECT button ❷; the disc number will appear in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

11