5.Repeat steps 2 - 4 to enter additional tracks. You can store upto 32 programs in memory.
Notes: If the PLAY/PAUSE Button is pressed before the MEMORY Button is pressed to store a track, the track will not be programmed, and the disc will start playing from the first selected track.
Any track can be programmed to play more than once.
If you press the STOP Button during MEMORY mode, the entire program will be erased from memory.
LISTENING TO PROGRAMMED TRACKS
Program your selection of tracks by following the procedure shown above.
Press the PLAY/PAUSE Button.
Disc play will start at the beginning of the first programmed track.
TO CLEAR THE PROGRAM MEMORY
If the disc is playing, press the STOP Button.
Press the STOP Button again. All the programs will then be erased from memory.
The program memory will also be cleared if the Function Selector is changed to another function, or if the power is switched off.
RECORD PLAYER
RECORD PLAYER UNPACKING - Before playing any records: | A | B | E | |
A. | 45 RPM ADAPTOR |
|
|
|
B. | TURNTABLE |
|
|
|
C. | PICK UP ARM |
|
|
|
D.33/45 SPEED SELECTOR
E. TRANSIT SCREW
* | If this is the first time the record player is used, |
|
| screw the transit screw clockwise until tight. |
|
| Failure to do this will cause vibration and hum. |
|
* | Unlock the PICK UP ARM from the PICK UP ARM | C D |
| REST. |
*Remove the stylus cover by pulling it gently forward, away from the HEAD SHELL.
1.Turn the unit on using the STANDBY/ON button.
2.Set the Function Selector to PHONO position.
3.Lift the DUST COVER and select the speed to suit the record you are about to play using the 33/45 RPM SPEED SELECTOR switch.
4.Place the record on the TURNTABLE so that the SPINDLE protrudes through the centre hole in the record.
5.Raise the
6.At the end of the record, the