PREPARATION FOR USE
Remove the stereo carefully from the box, retaining the packaging for future use.
Read these instructions carefully before use.
CONNECTIONS
Before switching on your stereo system, ensure that it is connected as follows:
SPEAKERS
Connect the speakers to the speaker sockets on the back of the music system.
Connect the left speaker to the left speaker socket and the right speaker to the right speaker socket.
Connect the Mains Lead to an AC outlet.
Insert two AAA batteries into the battery compartment of the remote controller.
You are now ready to switch on the power.
CAUTION
The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product.
The normal ventilation of the product must not be blocked.
LISTENING TO THE RADIO
OPERATION
Press the STANDBY/ON Button to turn the unit on, the
Set the FUNCTION Selector to the tuner position and the radio band selector to AM or FM position.
Tune into the station using the TUNING knob.
Adjust the VOLUME to the desired level using the VOLUME Control Knob.
To turn off the radio, press the STANDBY/ON Button.
MUTE
Press the MUTE Button on the remote control to switch off the sound, the MUTE indicator will light up.
Press MUTE again to restore the sound to the previous level. MUTE indicator will go off.
PRESET EQUALIZER
This unit is equipped with a preset equaliser which has been added to enhance your listening pleasure by altering the frequency response of the music to give it a different feel. Press the PRESET EQ Button repeatedly to cycle through the following equalization modes.
ROCK 
POP 
CLASSIC 
JAZZ 
NORMAL 
- 6 -