Directed Electronics PMP3520 manual „/2

1.	Strap Hole	Attach the hand-strap here.
2.	Navigation key	The 4-way Navigation key for menu selections.
3.	„/2	Press to stop or go-back from action.
4.		Press to stop and display menu, or go to the previous menu.
5.	LCD Display	Show menus and selection playing.
6.	Hold Handle	The hold handle of the PMP3520.
7.	Power LED	This LED is illuminated when the PMP3520 is powered
		on, and flashes when charging the battery.
8.	Record LED	This LED is illuminated when recording.
9.	Power On/Off	Press to power On/Off.
10.	Lock Switch	When this Switch is locked, all key press commands are
		disabled. Including power On/Off switch.
11.	MIC	Built-in microphone for voice recording.
12.	Volume Control	Push it to the right to increase volume, to the left to
		decrease volume. Press it down to mute.
13.	REC[●]	Press to start or stop recording.
14.	SD/MMC slot	Insert SD/MMC card to retrieve data.
15.	Speaker	Built-in speaker.
16.	AV Line-In Jack	Plug AV cable here to enable AV Line-In recording.
17.	Earphone Jack	Plug the earphones here.
18.	AV Line-Out Jack	Plug the AV cable here to connect the PMP3520 to an
		external display (TV).
19.	USB Connector	Connect the mini USB connector of the supplied USB
		cable here, and the other end to PC host/OTG equipment.
20.	DC-In Jack	Plug in the supplied AC Adapter here to recharge the
		battery.
21.	Battery cap	Press the latch and push the cap forward to replace the
		rechargeable battery.
22.	Tripod Screw Hole	Secure a tripod here to hold the PMP3520.
23.	IR Receiver	Implements commands from remote control.

10 © 2005 Directed Electronics—all rights reserved