Directed Electronics PMP3520 manual Li-Ion Battery Recharging

Li-Ion Battery Recharging

The PMP3520 comes with two Li-Ion rechargeable and removable batteries. Charge the battery completely before using the PMP3520 for the first time by following the steps below:

1.Connect the supplied AC Adapter to AC outlet, and plug in the other end of the AC Adapter to the DC in-jack of the PMP3520.

2.While recharging, the power LED above the LCD screen will flash. If you turn on the PMP3520 while recharging, you will see the power charging indica- tion at the top of the LCD display.

3.When the battery is fully charged, the Power LED will stop flashing. Disconnect the AC Adapter from the PMP3520.

NOTE 1: Charge the PMP3520 only with the supplied AC Adapter.

NOTE 2: Do NOT open the battery cap while power is on.

NOTE 3: You can still operate PMP3520 while it is being recharged; but the recharging time will be longer.

16 © 2005 Directed Electronics—all rights reserved