20
Simple Operations by Mode
Voice Recorder (Recording Voice with
Voice Recorder
(Recording Voice with Built-in Microphone)
Select Voice Recorder Mode. | Voice Recorder is in | Press REC button. | Voice Recording Starts. | Press REC button to finish recording. |
| Stand By status. |
|
|
|
1.Preparing Voice Recording
•Turn on iAUDIO, press the MODE button and select Voice Recorder.
•iAUDIO enters Voice Recording Mode and stays in STAND BY status.
2.Voice Recording Start/Pause/Stop
•In STAND BYstatus, press the REC button to start recording.
•Press the Play button to pause recording, and press it again to resume recording.
•Press the REC button again to finish recording. A "Wait" message appears while the file is being saved, and iAUDIO returns to STAND BY status when the saving finishes.
•The recorded file is saved as VOC***.MP3 in the VOICE folder according to the preset recording quality (***: a
•You cannot turn off iAUDIO, nor change Menu, Navigator or Mode while recording.
3.Playing Voice Recording file
•To play the last recorded file, press the PLAY button in STAND BY status.
•You can also press the MENU button briefly in STAND BY status to enter Navigator Mode or Digital Audio Mode, and then select a file to play.
•Operating iAUDIO while a file is played is identical to that of Digital Audio Mode.
•When a file finishes playing, iAUDIO automatically returns to STAND BY status.
•Press the REC button any time to stop playing. iAUDIO returns to STAND BY status again.
4.Recording Quality and Capacity
•For information on recording volumes and quality settings, see the relevant page in this Guide.
•The recorded file size cannot exceed 512MB. If the recorded file reaches this size, iAUDIO automatically saves it and then continues saving in a new recorded file. (Recording time for one file: Around 546 minutes per 128kbps)
•When free space in HDD is less than 128MB, recording does not start. If free space becomes less than 128MB during recording, iAUDIO automatically stops.
iAUDIO M3