Chapter 3: Basic Setup
3.2Installing an Internal Hard Disk Drive
3.21Inserting the Hard Disk
NOTE: Before Installing, ensure that the jumpers on your HDD are set to MASTER or SINGLE. Hard Disks with CABLE SELECT jumper settings may not work in Mvix
1.Locate the casing screw and turn it in clockwise direction.
2.Open the casing cover of the Mvix Player.
3.Gently lift the
4.Gently press the enclosure bracket
5.Slide the Hard Drive in the space so as to snugly fit the HDD in the enclosure brackets.
6.Release the bracket to secure the HDD in position.
7.Connect the TWO cables to your HDD. - HDD Data Cable (Flat Grey Cable) and
8.Slide the side panel cover back into place and lock the enclosure using the case screw button at the back.
X[ | Unicorn Information System |