Monarch 110 instruction manual Safeguards and Precautions, Limited Warranty

Page 2

Safeguards and Precautions

1.Read and follow all instructions in this manual carefully, and retain this manual for future reference.

2.Do not use this instrument in any manner inconsistent with these operating instructions or under any conditions that exceed the environmental specifications stated.

3.Ensure that the meter and test leads are in good condition with no visible signs of damage before use.

4.Ensure the test leads are installed in the proper connectors for the measurement to be made.

5.Ensure the Function Selector switch is in the correct position for the measurement to be made.

6.Do not, under any circustances, exceed the maximum ratings of this instrument.

7.Do not exceed the rated voltage between any input jack and ground.

8.Do not measure resistance or continuity in a circuit or test diodes while power is applied to that circuit.

9.Do not connect the test leads to a voltage source when the test leads are connected to the µA/mA or 10A input jacks.

10.Exercise extreme caution when working with voltages above 60 Vdc or 30 Vac. Such voltages pose a shock hazard.

11.Keep fingers behind the finger guards on the test leads when making measurements.

12.To avoid false readings, replace the batteries immediately when the low battery indication appears.

13.With exception of replacing the batteries or fuses, this instrument is not user serviceable. For technical assistance, contact the sales organization from which you purchased the product or Monarch Instrument directly.

LIMITED WARRANTY

SELLER warrants hardware products to be free from any defect in materials or workmanship for a period of one (1) year from date of shipment to BUYER. SELLER’s entire liability and BUYER’s sole and exclusive remedy resulting from any defect in workmanship or material in the hardware product covered by this limited warranty shall be limited to and fully discharged by the SELLER’s option of replacement or repair of such item without charge. The limited warranty provided in this clause is in lieu of all other warranties, expressed or implied, arising by law or otherwise. ALL IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. This limited warranty shall not be modified except by an arrangement signed by both parties specifically referencing this clause.

SELLER warrants that any software supplied will operate in accordance with the documentation or manual supplied therewith in all material respects when used in strict compliance with such documentation or manual. Notwithstanding the foregoing, BUYER acknowledges that, since software is complex and therefore may have defects, BUYER’s sole and exclusive remedy for any such defects or breach of this warranty shall be to require SELLER, within a reasonable period of time, to provide all reasonable programming services to correct programming errors in the software. Except as provided above SELLER MAKES AND BUYER RECEIVES FROM SELLER NO EXPRESS OR IMPLIED WARRANTIES OF ANY KIND WITH RESPECT TO ALL OR ANY PORTION OF SOFTWARE AND BUYER HEREBY AGREES AND ACKNOWLEDGES THAT IT ACCEPTS THE SOFTWARE IN ‘AS IS’ CONDITION. SELLER HEREBY EXPRESSLY EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SOFTWARE. BUYER agrees that any specific right or remedy granted to BUYER hereunder with respect to any breach or default by SELLER shall be in lieu of all other rights and remedies otherwise available to BUYER at law or in equity as the result of such breach or default, regardless of whether based on contract, tort, strict liability, or other theory of liability.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE LOSSES OR DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSSES OR DAMAGES FOR ANY LOST PROFITS OR LOST DATA)AS THE RESULT OF ANY BREACH OR DEFAULT BY SELLER WITH RESPECT TO THE HARDWARE OR SOFTWARE, EVEN IF SELLER HAS BEEN ADVISED OR MADE AWARE OF THE POSSIBILITY OF ANY SUCH LOSSES OR DAMAGES AND REGARDLESS OF WHETHER THE CLAIM IS BASED ON CONTRACT, TORT, STRICT LIABILITY, OR OTHER THEORY OF LIABILITY.

This limited warranty does not extend or apply to consumables (including, but not limited to, lamps and batteries, if applicable) or equipment, instruments or accessories which are warranted separately by the original manufacturer of these items.

Image 2 Contents
Monarch Autoranging Digital MultimeterSafeguards and Precautions Limited WarrantyTable of Contents Declaration of ConformitySpecifications IntroductionDiode Tester DC Current uA and mA AutorangingContinuity Beeper Range Battery life Auto Power OffPower requirement SafetyΜA, mA, Hz Replacing BatteriesReplacing Fuses Control Functions Continuity Measurements Low Battery ConditionOperating Instructions Fuse ProtectionResistance Measurements DC Voltage MeasurementsAC/DC Current Measurements