Music Hall Cruise Control 2.0 Climate, Racks and Stands, Cleaning, Power Sources, Non-use periods

Page 3

5. Climate

The electronic speed control has been designed for use in moderate climates. Do not attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95 degrees Fahrenheit (35 degrees Celsius).

6. Racks and Stands

Place the electronic speed control on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. We recommend only using stands approved for use with audio equipment.

7. Cleaning

A soft towel can be used.

8. Power Sources

Connect the electronic speed control to a power supply of the type and voltage described in the operating instructions or specified on the rear panel of the unit.

9. Power-cord protection

Connect the electronic speed control to the power outlet only with the supplied power supply. Do not modify the supplied power supply in any way. Do not attempt to defeat grounding and/or polarization provisions.

Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or damaged in any way.

10. Non-use periods

If the speed control is to be left unused for a long period of time, the power supply should be unplugged from the wall outlet.

11. Damage Requiring Service

Stop using the electronic speed control immediately and have it inspected by an authorized Music Hall service center whenever:

1.The power supply cord or plug has been damaged.

2.The electronic speed control has been exposed to rain.

3.The speed control does not operate properly.

4.The speed control has been dropped or damaged.

5.Smoke or any unusual smell is detected from the electronic speed control.

2

Image 3
Contents Music hall Congratulations on Your Purchase Safety GuidelinesDamage Requiring Service CleaningPower Sources Power-cord protectionIntroduction Getting StartedOperation Technical Specs Switching on and OFFPitch Control RPM ReplayService WarrantyClaims Under Warranty For Further Information Contact

Cruise Control 2.0 specifications

Music Hall Cruise Control 2.0 is a cutting-edge turntable speed controller designed for audiophiles and vinyl enthusiasts alike. This innovative device offers unparalleled control over the speed of your turntable, ensuring that your records play back with precision and clarity.

One of the main features of the Cruise Control 2.0 is its dual-speed support, allowing users to switch effortlessly between 33 1/3 and 45 RPM speeds. This flexibility is perfect for those with diverse vinyl collections, as different records often require different playback speeds. The device is equipped with an easy-to-read LED display that shows the selected speed and ensures you can quickly make adjustments without interrupting your listening experience.

The Cruise Control 2.0 employs ultra-accurate quartz crystal technology, which greatly enhances the stability and reliability of turntable speed. This technology minimizes speed fluctuations, guaranteeing that the pitch of your music remains consistent throughout playback. The result is a more immersive listening experience, where every note and nuance of your favorite records is faithfully reproduced.

In addition to its superior speed control, the Cruise Control 2.0 boasts advanced anti-vibration technology. The device features a built-in isolation base that helps dampen unwanted vibrations caused by footfalls or external movements, which can negatively impact playback quality. This thoughtful design allows you to enjoy your records without the interference of unwanted noise.

Another noteworthy characteristic of the Cruise Control 2.0 is its simple integration. It can be easily connected to any turntable using standard RCA connections, making it a versatile addition to your audio setup. Whether you have a vintage turntable or a modern model, the Cruise Control 2.0 is compatible, ensuring you can elevate your vinyl listening experience without extensive modifications to your existing equipment.

Furthermore, the Music Hall Cruise Control 2.0 is designed with durability in mind. The high-quality materials used in its construction ensure it can withstand the rigors of everyday use, providing long-lasting performance.

In conclusion, Music Hall's Cruise Control 2.0 is a remarkable advancement in turntable technology, offering essential features such as dual-speed support, quartz crystal accuracy, anti-vibration design, and easy connectivity. For anyone serious about vinyl, the Cruise Control 2.0 represents a valuable addition that enhances sound quality and listening enjoyment.