6 Adjust settings
1Press SYSTEM MENU.
2Select a setup page.
3Select an option and then press 
.
4Select a setting and then press OK.
To return to the previous menu, press
.
To exit the menu, press SYSTEM MENU.
[All] – If the connected device supports
[Night Mode]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
[On] only).
[Off] – enjoy surround sound with its full dynamic range.
English
General setup
On the [General Setup] page, you can set the following options:
[OSD language]
Select the preferred language for
[DivX® VOD Code]
Display the DivX® registration code.
Tip
Enter this DivX registration code when you rent or purchase video from http://vod.divx.com/.The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the following options:
[Digital Output]
Select audio formats supported by the connected device.
[Off] – Turn off the digital output. [PCM] – If the connected device cannot decode multichannel audio, select this option.
Video setup
On the [Video Setup] page, you can set the following options:
[TV System]
Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.
[NTSC] - For TV with NTSC color system. [PAL] - For TV with PAL color system. [Multi] - For TV that is compatible with both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of display according to the type of TV you have connected.
4:3 Pan Scan (PS) | 4:3 Letter Box (LB) | 16:9 (Wide Screen) |
[4:3 Pan Scan] – For 4:3 screen TV: full- height display with the trimmed sides. [4:3 Letter Box] – For 4:3 screen TV:
[Wide Screen] – For
EN 19