NOTE: If the 
Power of this system is ‘On’and the iPod function is already selected then your iPod® will begin to play as soon as it is connected to the dock, as long as the iPod® HOLD switch is ‘Off’. If your iPod® enters the Pause mode when you connect it to the dock, press the 
Play/pause button to begin playback.
7.) Once the iPod® is playing you can use the navigation controls on the iPod® to select among the menu items as usual. However you can only adjust the volume level by using the Volume +/– controls on the top panel or remote control of this unit. The click wheel volume control on the iPod® cannot be used to control the speaker volume level of this system.
8.) To skip or search forward or back to the next or previous song you can use
the Tuning/Skip 
or 
buttons on the top panel or the 
/ 
buttons on the remote control.
9.) The 
Play/pause buttons on the top panel of this system and the remote control have the same function as the 
Play/Pause button on your iPod® . Press once to begin playback. Press again to pause playback. Press and hold to shut the iPod® ‘Off’.
10.) When you have finished listening to your iPod® you may press the Function button to switch to the TUNER function. Your iPod® will shut off automatically. You may also press the 
Power button to shut this system ‘Off’. Your iPod® will shut off and the recharging circuit turns on automatically.
If you remove your iPod® from the docking connector we suggest that you close the docking compartment cover again to keep dust and other foreign objects out of the docking area.
NOTES:
•If you remove your iPod® from the docking connector during playback the power to this system is shut ‘Off’automatically.
•If you have a power failure while the iPod® is playing the iPod® power will be shut off automatically to preserve the iPod® internal battery.
29
iC200_NCab050307.p65 | 29 |