Emerson DTE810 owner manual To Activate the Sleep Function

Page 11

OPERATION (CONTINUED)

TO ACTIVATE THE SLEEP FUNCTION

1

2

Tune the desired radio station as previously instructed and slide the Function switch to the AUTO position.

Press the SLEEP button, 0:59 will appear on the clock display and the radio will come on, then release the button.

3

4

2

1

To cancel sleep time before it counts down to “00” and turn the radio off, press the SNOOZE button.

If you press the SLEEP button again after setting the sleep time, the sleep time will be set to 59 minutes automatically. To turn off the sleep time, press the SNOOZE button .

NOTE:

To select a longer playing time up to a maximum of 1 hour and 59 minutes, press the SLEEP and HOUR buttons simultaneously (the display will show 1 hour and 59 minutes). To adjust the minutes, press and hold the SLEEP button and press the MINUTE button until the desired time is shown on the clock display. Release the button when the preferred time is shown in the display.

10

Image 11
Contents DTE810 Safetyprecautions Safety Precautions Page Location of Controls Installation Indicated inside the battery compartment Remove the TRY ME Battery BOXTo Play the Radio To SET or Reset the Actual TimeOperation To SET the Alarm to Wake to Radio To SET or Reset the Alarm TimeTo Shut Alarm OFF Snooze Function To SET the Alarm to Wake to DoraTo Activate the Sleep Function To Activate the Night Light Radio Troubleshooting GuideEmerson Radio Corp Limited Warranty Emerson