Emerson CKD9918 owner manual Listening To the Radio

Setting the Time

Press the POWER/ALARM OFF button to turn off the unit, press once the CLK SET button and then press either the or buttons to adjust the hour time forward or backward as desired. Press again the CLK SET button and then either the or buttons to adjust the minute time forward or backward as desired.

AM

AM

Dimmer Control

If you find the display to be too bright for sleeping, slide the DIMMER selector switch to the LOW position. The display DIMMER selector switch is located on the left of the side cabinet.

Listening To the Radio

1.)	Press the POWER/ALARM OFF button on the
	top panel to turn the unit ‘On’. The POWER LED
	indicator will light.			MHz
2.)	Press the FUNCTION button repeatedly, it will
	change on the function to FM radio, AM radio, CD			FM BAND
	and Aux. To select FM Radio, press the
	FUNCTION button repeatedly until the display
	shows "r-F" (FM Radio), and		then MHz will
				KHz
	appear on the display. To select AM radio, press
	the FUNCTION button repeatedly until the
	display shows "r-A" (AM radio), and then KHz will			AM BAND
	now appear on the display.
3.)	Press and hold the	or	buttons on the top panel to start stations
	searches. When a station is received it will stop searching. Repeat the
	procedure until your desired stations are selected.
	If you tune to an FM stereo station, the ST (STEREO) indicator will light.
4.)	Rotate the VOLUME control on the left side panel to adjust the volume level.
5.)	When you are finished listening press the POWER/ALARM OFF button to
	turn the unit ‘Off’. The POWER LED indicator turns off.

In Radio listening mode, the radio frequency display will appear for approx. 3 seconds, then the clock time will appear on the display. Press the DISPLAY button to show the radio frequency, a few seconds later the display will show the clock time.

ST

AM

MHz

9