Emerson CKD9907 manual Alarm Operation

5.Press PLAY/PAUSE button to begin programmed playback. The tracks you selected will play in the programmed order. When all tracks have been played the player stops.

NOTES:

A.You must select a track and enter it in the memory while the “PROG” indicator is flashing (approximately 10 seconds). If the “PROG” indicator stops flashing the track will not be entered in the memory.

B.If you press the SKIP + or SKIP – buttons during programmed playback the player will skip forward or back to the next track in your program, not the next track on the disc.

ALARM OPERATION

You can chose to wake up to the electronic BUZZER, to AM/FM radio, or to the CD player.

First check the wake up time setting by sliding the ALARM switch to the SET position. Adjust the wake up time setting if necessary. See “Setting The Wake Up Time” on page 6. Then set the ALARM switch to the ON position. The ALARM ‘On’ indicator appears in the display.

•To wake to buzzer

Set the FUNCTION selector to the BUZZER position.

•To wake to radio

Set the FUNCTION selector to the AM or FM position. Make sure that the radio station is correctly tuned and the volume is set to the desired level.

•To wake to CD

Set the FUNCTION selector to the CD position. Confirm that a disc is in the player and the volume is set to the desired level.

At the selected wake up time the power will turn ‘On’ and operate the buzzer, radio or CD according to your selection. The alarm will continue for 60 minutes and then shut itself off automatically and reset itself for the following day.

•To stop the alarm immediately

Press the POWER button to turn the power ‘Off’. The alarm stops and resets itself to repeat again the following day at the same time. To cancel the alarm completely slide the ALARM switch to the OFF position. The alarm will not come on again.

11