PREPARATION FOR USE
Unpacking and Set-up
•Remove the unit from the shipping carton and remove all packing material from the unit. Please save the carton and packing material if possible in the event that your unit ever needs to be returned for service. Using the original carton and packing materials is the only way to protect your unit from damage in transit.
•Carefully remove any small strips of tape that may have been used to keep the CD door closed during shipment.
•Press on the CD door in the area marked OPEN/CLOSE to open the door. Inside the CD compartment you will see a white “dummy CD” transit protection card. This card prevents the laser
•Place the unit on a stable, level surface such as a table, desk, shelf, stand, etc, out of direct sunlight and away from sources of excess heat, dust, vibration, moisture, or humidity, and convenient to a 120V 60Hz AC outlet.
•Unwind the AC power cord and extend it to its full length. This is important. The FM antenna is built into the AC power cord.
Battery Back-up Systems
This model has two separate battery back up systems. There is a built in
We have also provided a separate
If you install a
5
CKD5809_030706.p65 | 5 |
7/3/2006, 14:57