Emerson CKD5809 owner manual Resetting The Clock After a Total Memory Loss

Page 35

Resetting The Clock After A Total Memory Loss

If you do not change the built in lithium battery within a reasonable period of time

after you see the flashing “

 

 

 

” warning indicator, the lithium battery may

 

 

become exhausted and will no longer be able to supply back up power to the SmartSet® internal computer.

If the unit is disconnected from the AC outlet after the battery is exhausted, or if a power interruption occurs, the SmartSet® memory will be lost and the clock will need to be reset when the power is restored. Be sure to install a fresh lithium battery before you reset the clock, otherwise the clock will need to be reset each time the power is interrupted.

If the lithium battery is exhausted and you experience an interruption in the AC power supply, the clock will reset itself to its initial default setting when the power is restored.

The initial default setting is “AM 12:00, Saturday, January 1st (1 01), 2005”.

If you notice that the time on your SmartSet® clock radio is completely incorrect, and the day indicator is also wrong, press the MONTH/DATE button to see the date. If the date display is showing “1 01” (January 1st), you probably experienced a total memory loss.

To reset the clock after a total memory loss, proceed as follows:

1.) Follow the instructions on pages 32-33 and install a new CR2430 lithium battery in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Depress the MONTH/DATE and TIME buttons together. The display will change from ‘Time’to ‘Year’.

While holding the MONTH/DATE and TIME buttons, press the button to set the display to the correct year if necessary, then release the buttons.

4.) Depress the MONTH/DATE button. The display will change from ‘Time’to ‘Month/Date’(mm/dd).

While holding the MONTH/DATE button, press the button to set the display to the correct Month and Date. The Day indicator will change automatically as you adjust the Month/Date settings. When the correct month and date appear on the display, release the buttons.

3 4

CKD5809_030706.p65

34

7/3/2006, 14:57

Page 34 Page 36
Image 35
Page 34 Page 36
Contents CKD5809 Important Safety Instructions Thank You… … … … CKD5809030706.p65 2006 Important Notes Unpacking and Set-up Battery Back-up SystemsInstalling The Sure-Alarm Back-up Battery Not Included Low Battery Indicator Power Source Location of Controls and Indicators SNOOZE/SLEEP/NAP OFF Button Power ON/OFF ButtonREV. SKIP/TUNING Button FWD. SKIP/TUNING + Button Wake UP Track ButtonWord About The And Controls Operating InstructionsSetting The Time, The First Time Important Daylight Saving Time Information Daylight Saving and Leap Year AdjustmentsDate Display Year DisplayAdjusting The Wake Up Times Manual Time AdjustmentsChecking The Wake Up Times And Alarm Mode Selecting The Alarm ModeListening To The Radio Manual TuningAutomatic Tuning Presetting Stations In The Tuner Memory Changing Preset Stations Recalling Preset StationsAntenna Information Playing Compact Discs CKD5809030706.p65 2006 SKIP/Search Controls Pause ControlSingle Track Repeat Repeat PlaybackProgrammed Playback Programmed Repeat Playback Wake To Radio Alarm OperationWake To Buzzer Crescendo Alarm Wake To CD To Cancel The AlarmsSnooze Alarm / Touchless Snooze Sleep Timer Phones Stereo Headphone Jack NAP Timer Buzzer Alarm OnlyDimmer Control Be Careful not to Lose this Small Screws Changing The Lithium BatteryCKD5809030706.p65 2006 Resetting The Clock After a Total Memory Loss Important Note Compact Disc Care Care and MaintenanceCare Of The Cabinet Lithium Battery PrecautionsLimited Warranty Emerson
Top Page Image Contents